Phone Port 1 (FXS 1)
Ring signal	Normal Off
Ring function	Normal When any internal SIP unit is ringing When internal SIP unit listed below is ringing
Ring function SIP URI:s	Wildcards (*, ? and !) allowed
Ringing timeout	seconds (0 means region default)
Dialling timeout	seconds, for each digit
Maximum call duration	seconds (0 means infinite)
Disconnect call if silent for	seconds (0 means infinite)
Disconnect call if no RTP received for	seconds (0 means infinite)
Voice codecs used	Prioritize decent quality and low bitrate: G.729, G.711 Prioritize quality, accept high bitrate: G.711, G.729 Prioritize low bitrate, then quality: G.729, G.711 Prioritize G.711: G.711, G.729 Prioritize G.729: G.729, G.711 Only G.711 64 kbit/s Only G.729 8 kbit/s
	Adapt to remote side codec prioritization
	Select a single codec for incoming calls
Use of µ-law and A-law companding	Region default Prioritize µ-law Prioritize A-law Adapt to PSTN gateway, begin with µ-law Adapt to PSTN gateway, begin with A-law Only µ-law Only A-law
Desired voice packet time	Codec default 5 milliseconds 10 milliseconds 15 milliseconds 20 milliseconds 30 milliseconds 40 milliseconds 50 milliseconds
DTMF transmission	Encoded as events (out-of-band) As audio (in-band)
Volume: Speaker	(-20...+20 dB)
Volume: Microphone	(-20...+20 dB)
Silence suppression	Off On
Echo cancellation	Off On
Fax over IP protocol (T.38)	Initiate T.38 only as called fax Initiate T.38 as calling or called fax T.38 disabled
	TCF transferred, max. 14400 bit/s TCF transferred, max. 12000 bit/s TCF transferred, max. 9600 bit/s TCF transferred, max. 7200 bit/s TCF transferred, max. 4800 bit/s TCF transferred, max. 2400 bit/s TCF local, max. 14400 bit/s TCF local, max. 12000 bit/s TCF local, max. 9600 bit/s TCF local, max. 7200 bit/s TCF local, max. 4800 bit/s TCF local, max. 2400 bit/s
Caller ID mode	Region default Off V.23 Bell 202 DTMF DTMF after ring
Caller ID number presentation	Mode default SIP-address SIP-user SIP-domain IP-address Number Number or Name Number or SIP-address Number or SIP-user Number or SIP-domain Number or IP-address Name Name or Number Name or SIP-address Name or SIP-user Name or SIP-domain Name or IP-address Off
Caller ID name presentation	Mode default SIP-address SIP-user SIP-domain IP-address Number Number or Name Number or SIP-address Number or SIP-user Number or SIP-domain Number or IP-address Name Name or Number Name or SIP-address Name or SIP-user Name or SIP-domain Name or IP-address Off
Caller ID maximum number length	-255...+255 characters (0 means mode default)
Caller ID maximum name length	-255...+255 characters (0 means mode default)
Display Caller ID during Call Waiting
Disable playing of early media and generate ringback locally
Ring signal regardless of offered media
Disable FXS port SIP registration
Disable registration of SIP media capability (RFC 3840)
SIP "Q-value" for registration	0.0 - 1.0
SIP "expires" value for registration	seconds

Phone Port 2 (FXS 2)
Ring signal	Normal Off
Ring function	Normal When any internal SIP unit is ringing When internal SIP unit listed below is ringing
Ring function SIP URI:s	Wildcards (*, ? and !) allowed
Ringing timeout	seconds (0 means region default)
Dialling timeout	seconds, for each digit
Maximum call duration	seconds (0 means infinite)
Disconnect call if silent for	seconds (0 means infinite)
Disconnect call if no RTP received for	seconds (0 means infinite)
Voice codecs used	Prioritize decent quality and low bitrate: G.729, G.711 Prioritize quality, accept high bitrate: G.711, G.729 Prioritize low bitrate, then quality: G.729, G.711 Prioritize G.711: G.711, G.729 Prioritize G.729: G.729, G.711 Only G.711 64 kbit/s Only G.729 8 kbit/s
	Adapt to remote side codec prioritization
	Select a single codec for incoming calls
Use of µ-law and A-law companding	Region default Prioritize µ-law Prioritize A-law Adapt to PSTN gateway, begin with µ-law Adapt to PSTN gateway, begin with A-law Only µ-law Only A-law
Desired voice packet time	Codec default 5 milliseconds 10 milliseconds 15 milliseconds 20 milliseconds 30 milliseconds 40 milliseconds 50 milliseconds
DTMF transmission	Encoded as events (out-of-band) As audio (in-band)
Volume: Speaker	(-20...+20 dB)
Volume: Microphone	(-20...+20 dB)
Silence suppression	Off On
Echo cancellation	Off On
Fax over IP protocol (T.38)	Initiate T.38 only as called fax Initiate T.38 as calling or called fax T.38 disabled
	TCF transferred, max. 14400 bit/s TCF transferred, max. 12000 bit/s TCF transferred, max. 9600 bit/s TCF transferred, max. 7200 bit/s TCF transferred, max. 4800 bit/s TCF transferred, max. 2400 bit/s TCF local, max. 14400 bit/s TCF local, max. 12000 bit/s TCF local, max. 9600 bit/s TCF local, max. 7200 bit/s TCF local, max. 4800 bit/s TCF local, max. 2400 bit/s
Caller ID mode	Region default Off V.23 Bell 202 DTMF DTMF after ring
Caller ID number presentation	Mode default SIP-address SIP-user SIP-domain IP-address Number Number or Name Number or SIP-address Number or SIP-user Number or SIP-domain Number or IP-address Name Name or Number Name or SIP-address Name or SIP-user Name or SIP-domain Name or IP-address Off
Caller ID name presentation	Mode default SIP-address SIP-user SIP-domain IP-address Number Number or Name Number or SIP-address Number or SIP-user Number or SIP-domain Number or IP-address Name Name or Number Name or SIP-address Name or SIP-user Name or SIP-domain Name or IP-address Off
Caller ID maximum number length	-255...+255 characters (0 means mode default)
Caller ID maximum name length	-255...+255 characters (0 means mode default)
Display Caller ID during Call Waiting
Disable playing of early media and generate ringback locally
Ring signal regardless of offered media
Disable FXS port SIP registration
Disable registration of SIP media capability (RFC 3840)
SIP "Q-value" for registration	0.0 - 1.0
SIP "expires" value for registration	seconds

Telephone Line Port (FXO)
Audio signal processing	Full encoding and decoding Short-cut with FXS1 Short-cut preferred Short-cut only
Extension dialling timeout	seconds, for each digit
Maximum call duration	seconds (0 means infinite)
Disconnect call if silent for	seconds (0 means infinite)
Disconnect call if no RTP received for	seconds (0 means infinite)
Voice codecs used	Prioritize decent quality and low bitrate: G.729, G.711 Prioritize quality, accept high bitrate: G.711, G.729 Prioritize low bitrate, then quality: G.729, G.711 Prioritize G.711: G.711, G.729 Prioritize G.729: G.729, G.711 Only G.711 64 kbit/s Only G.729 8 kbit/s
	Adapt to remote side codec prioritization
	Select a single codec for incoming calls
Use of µ-law and A-law companding	Region default Prioritize µ-law Prioritize A-law Adapt to PSTN gateway, begin with µ-law Adapt to PSTN gateway, begin with A-law Only µ-law Only A-law
Desired voice packet time	Codec default 5 milliseconds 10 milliseconds 15 milliseconds 20 milliseconds 30 milliseconds 40 milliseconds 50 milliseconds
DTMF transmission	Encoded as events (out-of-band) As audio (in-band)
Volume: Line in	(-20...+20 dB)
Volume: Line out	(-20...+20 dB)
Silence suppression	Off On
Echo cancellation	Off On
Fax over IP protocol (T.38)	Initiate T.38 only as called fax Initiate T.38 as calling or called fax T.38 disabled
	TCF transferred, max. 14400 bit/s TCF transferred, max. 12000 bit/s TCF transferred, max. 9600 bit/s TCF transferred, max. 7200 bit/s TCF transferred, max. 4800 bit/s TCF transferred, max. 2400 bit/s TCF local, max. 14400 bit/s TCF local, max. 12000 bit/s TCF local, max. 9600 bit/s TCF local, max. 7200 bit/s TCF local, max. 4800 bit/s TCF local, max. 2400 bit/s
Receive Caller ID	Region default Off V.23 Bell 202 DTMF DTMF after ring
	Check line free before using it
	Check dial tone before dialling
	Use voltage reversal on telephone line to detect on/off hook
	Disable playing of early media and generate ringback locally

General
Set region  Generic United States Sweden Australia